"On Seadoos there is a round flat spot to the left front of the tunnel to mount the stock Seadoo depth finder. I took a scrap piece of 1/2" plexiglass that you can get at a plastics supply house and cut it 1/8 larger rectangle than the puck. Then I cut it in half, end to end, on a band saw giving me two angled pieces. I glued the one piece of the plastic to the hull with 30 min epoxy and after it hardened I glued the puck to the top of it with 30 min epoxy. Perfect angle and reads at 70+ mph." - Larry
Comments
0 comments
Please sign in to leave a comment.