FishTrax™ 1X | ADJUSTING THE DETAIL DISPLAYED ON THE SCREEN Follow

Adjusting the amount of detail the shown on the VirtuView™ display is as simple as adjusting the fish finder’s sensitivity.  There are 10 user selectable sensitivity settings to choose from. Select a higher sensitivity setting to show smaller sonar returns on-screen, or a lower setting to remove clutter from the screen. Adjusting Sensitivity also affects how sonar returns are identified as fish icon symbols - more fish will be detected at a higher setting, fewer at a lower setting.    

To Adjust the Sensitivity: 

1. Press and release the    button 1 time (MENU I will appear at the top of the screen)  

2. Press and release the▾button until “Sensitivity” is highlighted. 

3. Press the    to expand the Sensitivity Menu. 

4. Press and release the  button to increase the sensitivity,to decrease the sensitivity. 

         • Press the   to save the adjustment and exit the Sensitivity Setup.  

         • Press V | ESC to cancel the adjustment and exit the Sensitivity Setup. 

5. Press and release the V | ESC button 2 times to exit the menu and return to the fish finder mode.