FishTrax™ Intelligent Sonar uses SONAR sound waves to detect depth, locate fish, and define bottom contour, composition and structure. Using specialized microprocessors, these sound waves are generated by the FishTrax™ display and sent to the FishTrax™ Sonar Sensor (Transducer). The sonar sensor, acting first as a “speaker”, emits these sound waves as a series of pulses. Then, microseconds later, the sonar sensor switches to a “microphone” and listens for the return of the pulses as they bounce off of objects in the water column (referred to as “echoes”). The “echoes” are sent back to the display where, using proprietary algorithms in the FishTrax™ software, they are analyzed for location, size, and composition. These signal are then arranged by FishTrax’s™ Human Interface Software and displayed in an easy to understand manner on the VirtuView™ HD Color Display.
Articles in this section
- FishTrax™ TechTutorials™ - Setup & Use Training Videos
- FishTrax 1C Erratic Readings While Ice Fishing
- Attaching The FishTrax Display To The Traxmount Portable Post Mount
- HawkEye FishTrax 1C Color Fish Finder Review
- What is the current draw on our FishTrax FT1PXC?
- The Batteries in my Fish Finder Do Not Last the Entire Day
- Can You Recommend a Storage Bag for the FishTrax Kayak Kit
- FishTrax 1C Showing Erratic Readings
- What batteries do you recommend for HawkEye fish finders?
- Can you you see the jig on the FishTrax 1C while icefishing?