Setting the Depth Alarms on a DepthTrax Boat Mount Depth Finder With Temp (DT1B/DT2B/DT1BX/DT2BX) Follow

DT1B and DT2B Non Temp Displays:

Shallow Water Alarm

The shallow alarm function can be set for depths ranging from 3 to 200 feet and triggers an alarm when the depth is less than the setting.  You must be in the “Depth Sounder” mode to adjust this setting.

To set the SHALLOW ALARM (upper alarm):

1. Press the "UP" key to access the shallow water alarm setting. The icon will illuminate and the    indicator will blink.
2. Pressing the "UP" key will increase the selected value. Pressing the "DOWN" key will reduce the value.
3. Pressing and releasing the key will change the value in 1-foot increments per second.
4. Holding down the key will change the value in 9 foot increments per second.
5. After the desired setting is achieved, the display will return to normal operation after 5 seconds.
6. The and  indicators will now be illuminated to indicate that a shallow water alarm is set.

When triggered, the alarm sounds an audible buzzer for ten seconds while flashing the warning LED and the  and  icons on the display.  After 10 seconds, the audible alarm mutes and the warning LED and the  and  icons continue to blink until the depth increases, or the alarm is reset.  To reset the alarm repeat steps 1 thru 5.

DEEP Water Alarm

The deep alarm function can be set for depths ranging from 3 to 200 feet and triggers an alarm when the depth is more than the setting.  You must be in the “Depth Sounder” mode to adjust this setting.

To set the DEEP ALARM (lower alarm):

1. Press the "DOWN" key to access the deep water alarm setting. The icon will illuminate and the    indicator will blink.
2. Pressing the "UP" key will increase the selected value. Pressing the "DOWN" key will reduce the value.
3. Pressing and releasing the key will change the value in 1-foot increments per second.
4. Holding down the key will change the value in 9 foot increments per second.
5. After the desired setting is achieved, the display will return to normal operation after 5 seconds.
6. The and  indicators will now be illuminated to indicate that a deep water alarm is set.

When triggered, the alarm sounds an audible buzzer for ten seconds while flashing the warning LED and the  and  icons on the display.  After 10 seconds, the audible alarm mutes and the warning LED and the  and  icons continue to blink until the depth increases, or the alarm is reset.  To reset the alarm repeat steps 1 thru 5.

DT1BX and DT2BX Temp Displays:

Shallow Water Alarm

The shallow alarm function can be set for depths ranging from 3 to 200 feet and triggers an alarm when the depth is less than the setting. You must be in the “Depth Sounder” mode to adjust this setting.

To set the SHALLOW ALARM (upper alarm):

1. Press and hold the "UP" and “DOWN” keys until the and indicators illuminate and the icon blinks. (approximately 3 seconds).

2. Release the Keys.

3. Press the "UP" key to access the shallow water alarm setting. The icon will illuminate and the indicator will blink.

4. Pressing the "UP" key will increase the selected value. Pressing the "DOWN" key will reduce the value.

5. Pressing and releasing the key will change the value in 1-foot increments per second.

6. Holding down the key will change the value in 9 foot increments per second.

7. After the desired setting is achieved, the display will return to normal operation after 5 seconds.

8. The and indicators will now be illuminated to indicate that a shallow water alarm is set.

When triggered, the alarm sounds an audible buzzer for ten seconds while flashing the warning LED and the and icons on the display. After 10 seconds, the audible alarm mutes and the warning LED and the and icons continue to blink until the depth increases, or the alarm is reset. To reset the alarm repeat steps 1 thru 5.

DEEP Water Alarm

The deep alarm function can be set for depths ranging from 3 to 200 feet and triggers an alarm when the depth is more than the setting. You must be in the “Depth Sounder” mode to adjust this setting.

To set the DEEP ALARM (lower alarm):

1. Press and hold the "UP" and “DOWN” keys until the and indicators illuminate and the icon blinks. (approximately 3 seconds).

2. Release the Keys.

3. Press the "DOWN" key to access the deep water alarm setting. The icon will illuminate and the indicator will blink.

4. Pressing the "UP" key will increase the selected value. Pressing the "DOWN" key will reduce the value.

5. Pressing and releasing the key will change the value in 1-foot increments per second.

6. Holding down the key will change the value in 9 foot increments per second.

7. After the desired setting is achieved, the display will return to normal operation after 5 seconds.

8. The and indicators will now be illuminated to indicate that a deep water alarm is set.

When triggered, the alarm sounds an audible buzzer for ten seconds while flashing the warning LED and the and icons on the display. After 10 seconds, the audible alarm mutes and the warning LED and the and icons continue to blink until the depth increases, or the alarm is reset. To reset the alarm repeat steps 1 thru 5.